Car Fixed
GarageProLogin
2016
chevrolet silverado4 views

Rough Idle or Engine Misfire

Expert diagnosis and repair solutions for 2016 Chevrolet Silverado Rough Idle or Engine Misfire. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
medium$150-$300
Replace spark plugs and ignition coils to address rough idle and misfire issues.
Source: https://repairpal.com/chevrolet/silverado-1500/2016/rough-idle

Repair Steps:

  1. Purchase new spark plugs and ignition coils compatible with the 2016 Chevrolet Silverado.
  2. Disconnect the battery to ensure safety.
  3. Remove the engine cover to access the ignition coils and spark plugs.
  4. Unplug the ignition coil connectors and remove the coils.
  5. Use a spark plug socket to remove the old spark plugs.
  6. Install new spark plugs and torque them to the manufacturer's specifications.
  7. Reinstall the ignition coils and reconnect the connectors.
  8. Reconnect the battery and start the engine to check for smooth idle.
2
medium$200-$400
Clean or replace fuel injectors to resolve misfire and rough idle.
Source: https://www.youtube.com/watch?v=m7Y9uVa-89E

Repair Steps:

  1. Purchase a fuel injector cleaning kit or replacement injectors.
  2. Disconnect the battery to ensure safety.
  3. Remove the air intake assembly to access the fuel rail.
  4. Depressurize the fuel system by removing the fuel pump relay and running the engine until it stalls.
  5. Disconnect the fuel rail and remove the injectors.
  6. Use a cleaning kit to clean the injectors or replace them with new ones.
  7. Reinstall the injectors and fuel rail, ensuring all connections are secure.
  8. Reconnect the battery and test the engine for smooth operation.
3
hard$300-$600
Perform a valve cleaning to address carbon buildup causing rough idle.
Source: https://diag.net/msg/m49zvvl0dwvt31skc7va8xj3s8

Repair Steps:

  1. Purchase a valve cleaning solution or service kit.
  2. Disconnect the battery to ensure safety.
  3. Remove necessary components to access the intake valves (may require removing the intake manifold).
  4. Apply the cleaning solution directly to the valves as per the product instructions.
  5. Allow the solution to work for the recommended time to dissolve carbon deposits.
  6. Reassemble the intake components and reconnect the battery.
  7. Start the engine and let it idle to ensure the cleaning process is complete.

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems