Car Fixed
GarageProLogin
2013
ford escape3 views

Rough Idle or Engine Misfire

Expert diagnosis and repair solutions for 2013 ford escape Rough Idle or Engine Misfire. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
medium$150-$300
Replace worn spark plugs and faulty ignition coils to resolve engine misfire and rough idle issues.
Source: https://www.justanswer.com/ford/l27me-low-idle-rpm-2013-escape-2-0-warm-operating.html

Repair Steps:

  1. Purchase new spark plugs and ignition coils compatible with the 2013 Ford Escape.
  2. Remove the engine cover to access the ignition system.
  3. Disconnect the electrical connectors from the ignition coils.
  4. Remove the old spark plugs and ignition coils.
  5. Install the new spark plugs and ignition coils.
  6. Reconnect the electrical connectors and replace the engine cover.
2
medium$100-$200
Inspect and repair vacuum leaks, particularly at the plenum seals, to address rough idle.
Source: https://repairpal.com/ford/escape/2013/rough-idle

Repair Steps:

  1. Perform a visual inspection of the engine bay for any obvious signs of vacuum leaks.
  2. Use a smoke machine to detect hard-to-find leaks in the vacuum system.
  3. Identify and replace any damaged hoses or seals, focusing on the plenum area.
  4. Re-test the vehicle to ensure the rough idle issue is resolved.
3
hard$200-$400
Check and adjust fuel pressure to resolve misfire issues affecting multiple cylinders.
Source: https://www.fordescape.org/threads/intermittent-misfire-on-all-cylinders.115039/

Repair Steps:

  1. Connect a fuel pressure gauge to the fuel rail.
  2. Start the engine and observe the fuel pressure reading.
  3. Compare the reading to the manufacturer's specifications.
  4. If the pressure is too low or too high, inspect the fuel pump, fuel filter, and pressure regulator.
  5. Replace faulty components as necessary and re-test the fuel pressure.
4
medium$50-$150
Address potential issues from TSB-12-8-23 by ensuring the vapor purge line is correctly installed.
Source: Technical Service Bulletin TSB-12-8-23

Repair Steps:

  1. Locate the vapor purge line in the air cleaner outlet pipe assembly.
  2. Verify the installation direction of the vapor purge line.
  3. Reinstall the line correctly if it was installed backwards.
  4. Clear any diagnostic trouble codes related to the issue using a scan tool.

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems