Car Fixed
GarageProLogin
2014
ford escape3 views

Check Engine Light On

Expert diagnosis and repair solutions for 2014 ford escape Check Engine Light On. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
easy$20-$30
Replace the gas cap to resolve potential EVAP system leaks triggering the check engine light.
Source: https://repairpal.com/ford/escape/2014/check-engine-light

Repair Steps:

  1. Purchase a new gas cap from an auto parts store.
  2. Remove the old gas cap by twisting it counterclockwise.
  3. Install the new gas cap by twisting it clockwise until it clicks.
2
medium$150-$250
Replace the oxygen sensor to address faulty readings causing the check engine light.
Source: https://www.fordofwestmemphis.com/blogs/3282/ford-of-west-memphis-service/the-ford-check-engine-light-common-causes-codes-and-issues/

Repair Steps:

  1. Locate the faulty oxygen sensor using a diagnostic tool.
  2. Disconnect the sensor's electrical connector.
  3. Use an oxygen sensor socket to remove the old sensor.
  4. Install the new sensor and reconnect the electrical connector.
3
hard$200-$400
Address EVAP system leaks by inspecting and replacing faulty components such as the purge valve or charcoal canister.
Source: https://www.justanswer.com/car/cqj0m-2014-ford-escape-july-check-engine-light.html

Repair Steps:

  1. Use a smoke machine to detect leaks in the EVAP system.
  2. Identify faulty components such as the purge valve or charcoal canister.
  3. Replace the faulty components and clear any diagnostic trouble codes.
4
medium$100-$200
Reprogram the PCM to resolve issues related to the cooling system valve circuit.
Source: https://static.nhtsa.gov/odi/tsbs/2016/SB-10075282-5448.pdf

Repair Steps:

  1. Connect a Ford diagnostic scan tool to the vehicle.
  2. Reprogram the PCM with the latest software update.
  3. Verify the repair by ensuring the check engine light does not return.
5
medium$150-$250
Replace the coolant bypass solenoid C to fix the check engine light related to DTC P26B7.
Source: https://static.nhtsa.gov/odi/tsbs/2016/SB-10075282-5448.pdf

Repair Steps:

  1. Locate the coolant bypass solenoid C in the engine bay.
  2. Disconnect the electrical connector and remove the solenoid.
  3. Install the new solenoid and reconnect the electrical connector.
  4. Clear any diagnostic trouble codes.

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems