Car Fixed
GarageProLogin
2014
ford escape3 views

Rough Idle or Engine Misfire

Expert diagnosis and repair solutions for 2014 ford escape Rough Idle or Engine Misfire. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
medium$150-$300
Replace faulty ignition coils to resolve misfire and rough idle issues.
Source: https://repairpal.com/ford/escape/2014/rough-idle

Repair Steps:

  1. Diagnose which ignition coil is faulty using an OBD-II scanner.
  2. Purchase replacement ignition coils compatible with the 2014 Ford Escape.
  3. Remove the engine cover to access the ignition coils.
  4. Disconnect the electrical connector from the faulty coil.
  5. Remove the retaining bolt and pull out the faulty coil.
  6. Install the new coil, secure it with the retaining bolt, and reconnect the electrical connector.
  7. Reinstall the engine cover and test the vehicle for improved idle.
2
medium$100-$200
Inspect and repair vacuum leaks, which are common causes of rough idle.
Source: https://www.justanswer.com/ford/dj2mh-2013-ford-escape-2-0l-started-idling-rough.html

Repair Steps:

  1. Use a smoke machine or carburetor cleaner to detect vacuum leaks around the intake manifold and hoses.
  2. Identify any cracked or damaged hoses and replace them.
  3. Check the intake manifold gasket for leaks and replace if necessary.
  4. Reassemble any removed components and test the vehicle for improved idle.
3
easy$50-$150
Clean or replace the throttle body and idle air control (IAC) valve.
Source: https://www.justanswer.com/ford/dj2mh-2013-ford-escape-2-0l-started-idling-rough.html

Repair Steps:

  1. Disconnect the battery to ensure safety.
  2. Remove the air intake duct to access the throttle body.
  3. Use throttle body cleaner to clean the throttle plate and surrounding area.
  4. Inspect the IAC valve for carbon buildup and clean it if necessary.
  5. Reinstall the air intake duct and reconnect the battery.
  6. Start the vehicle and check for improved idle performance.
4
medium$0-$100 (if done by a professional)
Perform a Misfire Monitor Neutral Profile Correction and KAM Reset.
Source: https://www.fordescape.org/threads/ford-escape-2014-1-6l-ecoboost-rough-idle-issue.117918/

Repair Steps:

  1. Connect an OBD-II scanner capable of performing a Misfire Monitor Neutral Profile Correction.
  2. Follow the scanner's instructions to perform the correction.
  3. Perform a Keep Alive Memory (KAM) reset to clear any adaptive learning data.
  4. Test drive the vehicle to ensure the rough idle has been resolved.
5
easy$40-$80
Check and replace spark plugs if worn or faulty.
Source: https://www.reddit.com/r/fordescape/comments/ymxdoc/2014_escape_stutteringshaking/

Repair Steps:

  1. Remove the engine cover to access the spark plugs.
  2. Use a spark plug socket to remove each spark plug.
  3. Inspect the spark plugs for wear or damage.
  4. Replace with new spark plugs, ensuring they are gapped correctly.
  5. Reinstall the engine cover and test the vehicle for improved idle.

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems