Car Fixed
GarageProLogin
2022
ford escape4 views

Rough Idle or Engine Misfire

Expert diagnosis and repair solutions for 2022 ford escape Rough Idle or Engine Misfire. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
medium$150-$300
Replace spark plugs and ignition coils to address rough idle and misfire issues.
Source: https://repairpal.com/ford/escape/2022/rough-idle

Repair Steps:

  1. Purchase new spark plugs and ignition coils.
  2. Remove the engine cover to access the spark plugs and coils.
  3. Disconnect the ignition coil connectors and remove the coils.
  4. Unscrew and remove the old spark plugs.
  5. Install new spark plugs and reconnect the ignition coils.
  6. Reattach the engine cover.
2
medium$100-$200
Inspect and repair vacuum leaks that may cause rough idle.
Source: https://repairpal.com/ford/escape/2022/rough-idle

Repair Steps:

  1. Use a smoke machine to detect vacuum leaks in the engine bay.
  2. Identify any hoses or gaskets that are leaking.
  3. Replace damaged hoses or gaskets.
  4. Re-test for leaks to ensure the issue is resolved.
3
easyFree under recall
Update engine control software to address fuel injector issues as per recall 22V859000.
Source: https://static.nhtsa.gov/odi/tsbs/2024/MC-11010920-0001.pdf

Repair Steps:

  1. Contact a Ford dealership to schedule a recall service.
  2. The dealer will update the engine control software to include fuel injector leak detection.
  3. A drain tube will be installed if necessary.
  4. Verify the update and installation with the dealer.
4
mediumFree under recall
Inspect and replace the engine oil separator housing if cracked, as per recall 22V191000.
Source: https://static.nhtsa.gov/odi/tsbs/2024/MC-11010920-0001.pdf

Repair Steps:

  1. Contact a Ford dealership to check for recall eligibility.
  2. The dealer will inspect the oil separator housing for cracks or leaks.
  3. If damage is found, the dealer will replace the oil separator and seals.
  4. Confirm the repair with the dealership.
5
easyFree under recall
Address potential software issues causing misfire by updating the Hybrid Powertrain Control Module (HPCM) software.
Source: https://static.nhtsa.gov/odi/tsbs/2024/MC-11010920-0001.pdf

Repair Steps:

  1. Visit a Ford dealership to perform a software update.
  2. The dealer will update the HPCM software to prevent unexpected shifts into neutral.
  3. Verify the update with a test drive to ensure the issue is resolved.

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems