2009
honda civic4 views

Check Engine Light On

Expert diagnosis and repair solutions for 2009 honda civic Check Engine Light On. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
easy$10-$20
Tighten or replace the gas cap to resolve CEL caused by a loose or missing gas cap.
Source: https://www.autonationhondarenton.com/service/check-engine-light.htm

Repair Steps:

  1. Inspect the gas cap for damage or looseness.
  2. Tighten the gas cap until it clicks.
  3. If damaged, replace the gas cap with a new one.
  4. Drive the vehicle for a few miles to see if the CEL turns off.
2
medium$150-$300
Replace the faulty oxygen sensor to resolve CEL related to emissions.
Source: https://www.penskehondaindy.com/service/service-tips-and-tricks/how-to-reset-honda-check-engine-light/

Repair Steps:

  1. Locate the faulty oxygen sensor using a diagnostic scanner.
  2. Disconnect the electrical connector of the sensor.
  3. Remove the sensor using an appropriate wrench.
  4. Install the new sensor and reconnect the electrical connector.
  5. Clear the CEL using a diagnostic tool.
3
medium$100-$200
Inspect and replace faulty spark plugs or ignition coils to resolve misfiring issues.
Source: https://www.youtube.com/watch?v=IggoTaSsakQ

Repair Steps:

  1. Use a diagnostic scanner to identify misfiring cylinders.
  2. Remove the ignition coil and spark plug from the affected cylinder.
  3. Inspect the spark plug for wear or damage and replace if necessary.
  4. Replace the ignition coil if it's faulty.
  5. Reinstall the components and clear the CEL.
4
medium$50-$150
Check for vacuum leaks and repair them to resolve CEL related to air intake issues.
Source: https://www.lhmhonda.com/honda-civic-check-engine-light.htm

Repair Steps:

  1. Inspect vacuum hoses for cracks or disconnections.
  2. Use a smoke machine to detect leaks in the intake system.
  3. Repair or replace any damaged hoses or components.
  4. Clear the CEL and test drive the vehicle to ensure the issue is resolved.
5
mediumFree under recall
Replace the airbag inflator as part of the recall to ensure safety, though unrelated to CEL.
Source: Recall Campaign 19V502000

Repair Steps:

  1. Contact a Honda dealer to confirm recall eligibility.
  2. Schedule an appointment for the recall service.
  3. Have the dealer replace the airbag inflator at no cost.
  4. Verify the repair completion with the dealer.

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →