Car Fixed
GarageProLogin
2019
toyota rav44 views

Rough Idle or Engine Misfire

Expert diagnosis and repair solutions for 2019 toyota rav4 Rough Idle or Engine Misfire. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
medium$150-$300
Replace faulty spark plugs and ignition coils to resolve rough idle and misfire issues.
Source: https://craigscarcare.com/blog/toyota-engine-misfire-troubleshooting/

Repair Steps:

  1. Purchase new spark plugs and ignition coils compatible with the 2019 Toyota RAV4.
  2. Remove the engine cover to access the ignition coils.
  3. Disconnect the electrical connectors from the ignition coils.
  4. Remove the ignition coils and spark plugs.
  5. Install the new spark plugs and ignition coils.
  6. Reconnect the electrical connectors and replace the engine cover.
2
easyFree (under recall)
Inspect and replace the fuel pump under recall 20V682000 to prevent engine stalling and misfires.
Source: https://www.nhtsa.gov/recalls?nhtsaId=20V682000

Repair Steps:

  1. Contact a Toyota dealership to confirm recall eligibility.
  2. Schedule an appointment for recall service.
  3. The dealership will replace the fuel pump assembly with an improved version at no cost.
3
easy$10-$20
Clean the Mass Air Flow (MAF) sensor to improve air-fuel mixture and resolve rough idle.
Source: https://brockautomotive.com/2024/09/24/what-are-the-common-causes-of-a-rough-idle-in-my-toyota/

Repair Steps:

  1. Purchase a MAF sensor cleaner from an auto parts store.
  2. Locate the MAF sensor near the air filter housing.
  3. Disconnect the MAF sensor electrical connector.
  4. Remove the MAF sensor from the air intake system.
  5. Spray the MAF sensor cleaner on the sensor wires.
  6. Allow the sensor to dry completely before reinstalling.
  7. Reconnect the electrical connector and reassemble the air intake system.
4
medium$100-$200
Replace the engine control module (ECM) calibration to address hesitation and potential misfire issues.
Source: https://static.nhtsa.gov/odi/tsbs/2024/MC-10252262-9999.pdf

Repair Steps:

  1. Visit a Toyota dealership to access the latest ECM calibration update.
  2. The technician will connect the vehicle to a diagnostic tool.
  3. The ECM will be reprogrammed with updated calibration settings.
  4. Perform a test drive to ensure the issue is resolved.
5
hard$500-$1000
Replace exhaust valve hydraulic lifters if defective, as they can cause cylinder misfire.
Source: https://www.rav4world.com/threads/cylinder-misfire.341048/

Repair Steps:

  1. Diagnose the specific cylinder misfire using a diagnostic tool.
  2. Remove the valve cover to access the camshaft and hydraulic lifters.
  3. Replace the defective hydraulic lifters under the exhaust camshaft.
  4. Reinstall the valve cover and ensure proper sealing.
  5. Perform a test drive to confirm the misfire is resolved.

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems